Current Firmware Versions

Product		Version
TellStick		6
TellStick Duo		12
TellStick Net		17
TellStick Net v2		1.2.0
TellStick ZNet Lite		1.2.0
TellStick ZNet Lite v2		1.2.0

Changelogs

TellStick

TellStick Duo

Changes since last stable version (version 5)

• Support for some Oregon Scientific version 3 sensors
• Can receive Hasta protocol, version 1 and 2
• Checksum validation for Fineoffset (less false temperature readings)
• Fix where some motion sensors/magnetic switches reported different codes for on and off
• Better Oregon Scientific reception

TellStick Net

Changes since last stable version (version 4)

• Support for some Oregon Scientific version 3 sensors
• Can receive Hasta protocol, version 1 and 2
• Checksum validation for Fineoffset (less false temperature readings)
• Fix where some motion sensors/magnetic switches reported different codes for on and off
• Improved the way the Oregon Scentific protocol is received
• More precise server assignment logic allows for a TellStick Net to be placed on a certain server, which may be useful for beta testers
• DHCP assignment fixes
• Some minor bug fixes

TellStick ZNet Lite v1 & v2, TellStick Net v2

Changes in version 1.3.1 (beta)

Bugfixes:

• Thermostat fixes
• Allow Shelly-plugin through firewall

Changes in version 1.3.0 (beta)

New features:

• Thermostat support
• Sensor type Power, intended to eventually replace Watt

Changes in version 1.2.0

New features:

• New sensor types: CO, CO2, PM2.5, Loudness, Volume, Weight and Moisture
• New power types Ampere and Volt
• URL-actions (in events) now support https
• Firmware is ready for Rooms! (more information will follow)
• Firmware is ready for Modes! (more information will follow)
• Hostname and vendorid added to dhcp request
• Add support for Z-Wave rain sensors
• Add support for sending Z-Wave meter reset commands

Bugfixes:

• Time conditions after 00:00 were not always evaluated correctly
• Nexa codeswitch bell did not work correctly
• Too big messages between TellStick and servers were not sent correctly, could affect for example device synchronization lists
• Sensors reporting more than one type of value at the same time did not always send latest timestamp/value for all values (might diff 5 minutes)
• Blockheater event had many minor bugs
• When TellStick switched server, history about whether a trigger has triggered or not was lost, so a trigger might trigger again
• Devices are now listed in the parameters of a group
• Changing of RGB values possible also from local API
• Try to resync time again if no network was available at boot time
• Lots of other small bugfixes

Changes in version 1.1.1

• Fix bug where it was not possible to change device names
• Fix bug where TellStick showed red light altough it was online
• Bugfix in protocol UPM. No data was transmitted.

Changes in version 1.1.0

• Security update
• Add support for device types
• Add support for local control from the app
• Bugfix where the dim value was lost after a name of a device was changed.
• Bugfix, state change within one second was not acknowledged properly
• Return sensor values as float in local API
• Add option to enable beta firmware

Changes in version 1.0.15

• Security updates
• Bugfix where the dim value was lost after a name of a device was changed.

Changes in version 1.0.14

• Better handling of Z-Wave-associations
• Return sensor values as float in local API
• Bugfix, state change within one second was not acknowledged properly

Changes in version 1.0.12

• Add support for rf433 protocol Upm
• Bugfix for delays in events where not stopped properly when switching servers
• Bugfix for non-ascii characters in URLs in events
• Bugfix: Nexa selflearning bell did not work after scanning
• Bugfix for offset in suntime conditions
• Add support for receiving protocol Sartano
• Added battery report for 433 MHz sensors, where available
• Automatic cleanup of 433 MHz sensors that haven't received any signals for a while

Changes in version 1.0.11

• Allow lua functions to be called from the local api
• Bugfix for large data transfers over SSL

Changes in version 1.0.10

• Bugfix for handling a corrupt settings file
• Bugfix when large messages are received from Telldus Live!

Changes in version 1.0.9

• Add support for rf433 protocol SilvanChip (Kingpin, Ecosavers)
• Add support for rf433 protocol Brateck (Roxcore)
• Add support for rf433 protocol Ikea
• Add support for Kangtai selflearning
• Allow raw 433 data be processed by Lua code
• Add support for passing username and password in url actions
• New local webinterface based on React

Changes in version 1.0.8

• Include local API (beta)
• Retry events if a device action failes.
• Z-Wave: Ignore bogus sensor values that a device does not support.
• Z-Wave: Support Aeon Labs Smart Switch 6
• Bugfix where the time might not be set correctly if no internet was available on boot
• Various bugfixes

Changes in version 1.0.7

• Bugfix, negative values where reported as 4 billion degrees.
• Add support for rf433 protocol Waveman
• Add support for thermostats
• Fix for Qubino devices that stops inclusion at 26%

Changes in version 1.0.6

• Add support for rf433 protocol Kangtai (Cotech and Clas Ohlson)
• Add support for rf433 protocol Yidong (Biltema and Goobay)
• Bug fix: Fix for dimmers in scheduled jobs
• Fix bug when sending multiple rf433 commands quickly after each other
• Add support for groups
• Fix for not setting the dimmer value in the device state and device
• Add rf433 protocol Sartano
• Fix for scheduler bug rerunning a job between midnight and UTC midnight
• Fix bug to not end up offline if an error occurs while talking to the server
• Bugfix for reporting dim values correctly for Z-Wave devices.