Current Firmware Versions

Product		Version
TellStick		6
TellStick Duo		12
TellStick Net		17
TellStick Net v2		1.3.3
TellStick ZNet Lite		1.3.3
TellStick ZNet Lite v2		1.3.3
TellStick Flow		1.2.5

Changelogs

TellStick Flow

Changes in version 1.2.5 (in beta)

Bugfixes:

• TLS root certificates update.
• Duplicated sensor events are no longer being updated to Telldus Live.
• Implemented work around for a rarely occurred but irrecoverable TLS error that happened right after provisioning.

Changes in version 1.2.4 (latest)

Bugfixes:

• TLS root certificates update.
• More robust BLE mesh communication.
• Various stability improvements.

TellStick ZNet Lite v1 & v2, TellStick Net v2

Changes in version 1.3.3 (in beta)

Bugfixes:

• Tighter control over plugin names. Names are now restricted to only alphanumeric characters, space and hyphen.
• Fixed a bug in plugin configuration value handling that prevented the field from being corrected.
• Fixed a bug in plugin configuration value that led to unusable min and max values.

Changes in version 1.3.2 (latest)

Bugfixes:

• It's now possible to add a group from the API (not only the web interface)
• "Last updated" may now be included from a sensor API call ("info" and "list")
• Battery level is now included in sensor info API call, if any
• Allow Lifx plugin correctly through the firewall
• Allow UPnP correctly through the firewall
• Allow local API requests to be sent using "POST"
• Fixed: Handle DST changes for time triggers
• Fixed: Suntime triggers that didn't work after a period of midnight sun or polar night
• Fixed: Suntime condition. Make sure the sun is considered "up" in conditions even if the sun sets and rises again in the same day (before 00:00 UTC)
• Fixed: Failures in Device history. Sometimes failed commands where not included in the device history (for example when not being able to run a schedule after several attempts), and in other cases fails could be listed as success in the device history, and in yet other cases the origin of a command was incorrect on failed commands
• Fixed: In some circumstance sensors where not set as ignored in user interface, even if they where actually ignored
• Fixed: Blockheater was not always calculated correctly on the first day of the month
• Fixed: Multiple entries in device history when controlling TZWP102
• Lots of thermostat fixes, including:
  • Correct handling of sending commands to non-listening thermostats (thermostats with batteries)
  • Better messages in device history when changing mode or temperature
  • Fix problem when including thermostat as secure
  • Handle negative temperatures
  • Correct and consistent handling of thermostat reports
  • Wait for a report back from the thermostat, before updating status/temperature in the user interface
  • Don't change "mode" in a command if not explicitly asked to

Known issues:

• Some types of failed device state changes will be logged twice in the device history until after a server upgrade

Changes in version 1.3.1

Bugfixes:

• Thermostat fixes
• Allow Shelly-plugin through firewall

Changes in version 1.3.0 (beta)

New features:

• Thermostat support
• Sensor type Power, intended to eventually replace Watt

Changes in version 1.2.0

New features:

• New sensor types: CO, CO2, PM2.5, Loudness, Volume, Weight and Moisture
• New power types Ampere and Volt
• URL-actions (in events) now support https
• Firmware is ready for Rooms! (more information will follow)
• Firmware is ready for Modes! (more information will follow)
• Hostname and vendorid added to dhcp request
• Add support for Z-Wave rain sensors
• Add support for sending Z-Wave meter reset commands

Bugfixes:

• Time conditions after 00:00 were not always evaluated correctly
• Nexa codeswitch bell did not work correctly
• Too big messages between TellStick and servers were not sent correctly, could affect for example device synchronization lists
• Sensors reporting more than one type of value at the same time did not always send latest timestamp/value for all values (might diff 5 minutes)
• Blockheater event had many minor bugs
• When TellStick switched server, history about whether a trigger has triggered or not was lost, so a trigger might trigger again
• Devices are now listed in the parameters of a group
• Changing of RGB values possible also from local API
• Try to resync time again if no network was available at boot time
• Lots of other small bugfixes

Changes in version 1.1.1

• Fix bug where it was not possible to change device names
• Fix bug where TellStick showed red light altough it was online
• Bugfix in protocol UPM. No data was transmitted.

Changes in version 1.1.0

• Security update
• Add support for device types
• Add support for local control from the app
• Bugfix where the dim value was lost after a name of a device was changed.
• Bugfix, state change within one second was not acknowledged properly
• Return sensor values as float in local API
• Add option to enable beta firmware

Changes in version 1.0.15

• Security updates
• Bugfix where the dim value was lost after a name of a device was changed.

Changes in version 1.0.14

• Better handling of Z-Wave-associations
• Return sensor values as float in local API
• Bugfix, state change within one second was not acknowledged properly

Changes in version 1.0.12

• Add support for rf433 protocol Upm
• Bugfix for delays in events where not stopped properly when switching servers
• Bugfix for non-ascii characters in URLs in events
• Bugfix: Nexa selflearning bell did not work after scanning
• Bugfix for offset in suntime conditions
• Add support for receiving protocol Sartano
• Added battery report for 433 MHz sensors, where available
• Automatic cleanup of 433 MHz sensors that haven't received any signals for a while

Changes in version 1.0.11

• Allow lua functions to be called from the local api
• Bugfix for large data transfers over SSL

Changes in version 1.0.10

• Bugfix for handling a corrupt settings file
• Bugfix when large messages are received from Telldus Live!

Changes in version 1.0.9

• Add support for rf433 protocol SilvanChip (Kingpin, Ecosavers)
• Add support for rf433 protocol Brateck (Roxcore)
• Add support for rf433 protocol Ikea
• Add support for Kangtai selflearning
• Allow raw 433 data be processed by Lua code
• Add support for passing username and password in url actions
• New local webinterface based on React

Changes in version 1.0.8

• Include local API (beta)
• Retry events if a device action failes.
• Z-Wave: Ignore bogus sensor values that a device does not support.
• Z-Wave: Support Aeon Labs Smart Switch 6
• Bugfix where the time might not be set correctly if no internet was available on boot
• Various bugfixes

Changes in version 1.0.7

• Bugfix, negative values where reported as 4 billion degrees.
• Add support for rf433 protocol Waveman
• Add support for thermostats
• Fix for Qubino devices that stops inclusion at 26%

Changes in version 1.0.6

• Add support for rf433 protocol Kangtai (Cotech and Clas Ohlson)
• Add support for rf433 protocol Yidong (Biltema and Goobay)
• Bug fix: Fix for dimmers in scheduled jobs
• Fix bug when sending multiple rf433 commands quickly after each other
• Add support for groups
• Fix for not setting the dimmer value in the device state and device
• Add rf433 protocol Sartano
• Fix for scheduler bug rerunning a job between midnight and UTC midnight
• Fix bug to not end up offline if an error occurs while talking to the server
• Bugfix for reporting dim values correctly for Z-Wave devices.

TellStick Net

Changes since last stable version (version 4)

• Support for some Oregon Scientific version 3 sensors
• Can receive Hasta protocol, version 1 and 2
• Checksum validation for Fineoffset (less false temperature readings)
• Fix where some motion sensors/magnetic switches reported different codes for on and off
• Improved the way the Oregon Scentific protocol is received
• More precise server assignment logic allows for a TellStick Net to be placed on a certain server, which may be useful for beta testers
• DHCP assignment fixes
• Some minor bug fixes

TellStick Duo

Changes since last stable version (version 5)

• Support for some Oregon Scientific version 3 sensors
• Can receive Hasta protocol, version 1 and 2
• Checksum validation for Fineoffset (less false temperature readings)
• Fix where some motion sensors/magnetic switches reported different codes for on and off
• Better Oregon Scientific reception