Changes between Version 14 and Version 15 of How_to_restore_a_bricked_TellStick_Net


Ignore:
Timestamp:
Jun 18, 2014, 7:59:55 AM (12 years ago)
Author:
Fredrik Jacobsson
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • How_to_restore_a_bricked_TellStick_Net

    v14 v15  
    88
    99Cycle the power to the TellStick Net and make sure the green led on the network connector flashes in groups of seven blinks. If it does it is now in recovery mode and is ready for a new firmware.
    10 
    11 ''This guide is still under development. If you have to restore your TellStick Net. Please contact Telldus.''
    1210
    1311[[BR]][[BR]]
    … …  
    2725Click {{{OK}}} and then {{{Close}}} on the previous dialog to close them and set the new address.
    2826
    29 Open a terminal {{{Start}}} > {{{Search programs and files}}} > {{{cmd}}}[[BR]]
    30 Type: {{{tftp 192.168.97.60 PUT C:\Users\Micke\Desktop\tellstick_net_fw3.hex}}} Do not press enter.[[BR]]
    31 (Replace "C:\Users\Micke\Desktop" to your path to the downloaded firmware.)[[BR]]
    32 Toggle the power to the TellStick Net and within 4 seconds [[BR]]
    33 Execute the PUT command by pressing enter.[[BR]]
     27Open a terminal: {{{Start}}} > {{{Search programs and files}}} > {{{cmd}}}[[BR]]
     28Type: {{{tftp 192.168.97.60 PUT C:\Users\Micke\Desktop\tellstick_net_fwXX.hex}}} Do not press enter.[[BR]]
     29(Replace "C:\Users\Micke\Desktop\tellstick_net_fwXX.hex" to your path to the downloaded firmware.)[[BR]]
     30Toggle the power to the TellStick Net and within 4 seconds execute the PUT command by pressing enter.[[BR]]
    3431[[Image(tftp_w7.png, nolink)]]
    3532