[[Include(restore_info)]] === Windows 7 === tftp is not activated by default in Windows 7. It is easily installed though. Open {{{Control Panel}}} > {{{Programs and Features}}} > click {{{Turn Windows features on or off}}} in left side > enable {{{TFTP Client}}} then click in {{{OK}}}. Next, the computer must exist on the same subnet as TellStick Net. To do this we need to change the computers ip-address. Open {{{Control Panel}}} > {{{Network and Internet}}} > {{{Network and Sharing Center}}} > click {{{Change adapter settings}}} in the left side.[[BR]] Right click on the network adapter that you are using and choose {{{Properties}}}. Select {{{Internet Protocol Version 4 (TCP/IPv4)}}} and click {{{Properties}}}.[[BR]] [[Image(network_adapter.png, nolink)]] Select {{{Use the following IP address}}} and enter the IP address {{{192.168.97.61}}} and the subnet mask {{{255.255.255.0}}}.[[BR]] [[Image(ip_address_w7.png, nolink)]][[BR]] Click {{{OK}}} and then {{{Close}}} on the previous dialog to close them and set the new address. Open a terminal: {{{Start}}} > {{{Search programs and files}}} > {{{cmd}}}[[BR]] Type: {{{tftp 192.168.97.60 PUT C:\Users\Micke\Desktop\tellstick_net_fwXX.hex}}} Do not press enter.[[BR]] (Replace "C:\Users\Micke\Desktop\tellstick_net_fwXX.hex" to your path to the downloaded firmware.)[[BR]] Toggle the power to the TellStick Net and within 4 seconds execute the PUT command by pressing enter.[[BR]] [[Image(tftp_w7.png, nolink)]]