[[Include(restore_info)]]
=== Windows 7 ===

tftp is not activated by default in Windows 7. It is easily installed though. Open {{{Control Panel}}} > {{{Programs and Features}}} > click {{{Turn Windows features on or off}}} in left side > enable {{{TFTP Client}}} then click in {{{OK}}}.

Next, the computer must exist on the same subnet as TellStick Net. To do this we need to change the computers ip-address. Open {{{Control Panel}}} > {{{Network and Internet}}} > {{{Network and Sharing Center}}} > click {{{Change adapter settings}}} in the left side.[[BR]]
Right click on the network adapter that you are using and choose {{{Properties}}}.

Select {{{Internet Protocol Version 4 (TCP/IPv4)}}} and click {{{Properties}}}.[[BR]]
[[Image(network_adapter.png, nolink)]]

Select {{{Use the following IP address}}} and enter the IP address {{{192.168.97.61}}} and the subnet mask {{{255.255.255.0}}}.[[BR]]
[[Image(ip_address_w7.png, nolink)]][[BR]]

Click {{{OK}}} and then {{{Close}}} on the previous dialog to close them and set the new address.

Open a terminal: {{{Start}}} > {{{Search programs and files}}} > {{{cmd}}}[[BR]]
Type: {{{tftp 192.168.97.60 PUT C:\Users\Micke\Desktop\tellstick_net_fwXX.hex}}} Do not press enter.[[BR]]
(Replace "C:\Users\Micke\Desktop\tellstick_net_fwXX.hex" to your path to the downloaded firmware.)[[BR]]
Toggle the power to the TellStick Net and within 4 seconds execute the command by pressing enter.[[BR]]
[[Image(tftp_w7.png, nolink)]]