== How to restore a bricked TellStick Net v2, TellStick ZNet Lite (v1), or TellStick ZNet Lite v2 == Did something happen during a firmware upgrade of your TellStick? And now it won't start again?[[BR]] Don't worry! You can probably restore it again yourself. If something goes wrong while upgrading the firmware in the TellStick, you'll need to put it into failsafe mode. It will then start a web browser at ip address 192.168.97.60 and it's possible to upload a new firmware there. You will need to join the same network on your computer and upload the firmware. '''Please note: It's very important that you download the correct firmware for your product! '''[[BR]] The firmware can be downloaded here: [[BR]][[BR]] '''TellStick Net v2:''' [[BR]] http://fw.telldus.com/tellstick-net-v2/tellstick-net-v2-1.0.8-120-gc8a3942.bin '''TellStick ZNet Lite (v1):'''[[BR]] http://fw.telldus.com/tellstick-znet-lite/tellstick-znet-lite-1.0.9.bin '''TellStick ZNet Lite v2:'''[[BR]] http://fw.telldus.com/tellstick-znet-lite-v2/tellstick-znet-lite-v2-1.0.8-122-ge6578e0.bin Disconnect the power to TellStick[[BR]] Press and hold the button next to the USB-connector, using a paperclip or other sharp object.[[BR]] Connect the power again.[[BR]] The middle LED should now flash four times. First flash should be longer and then three shorter flashes. Release the button after the fourth flash. [[BR]] The middle LED will now confirm by flashing fast for one second.[[BR]] [[BR]]