== How to restore a bricked TellStick Net v2, TellStick ZNet Lite (v1), or TellStick ZNet Lite v2 ==
Did something happen during a firmware upgrade of your TellStick? And now it won't start again?[[BR]]
Don't worry! You can probably restore it again yourself.

If something goes wrong while upgrading the firmware in the TellStick, you'll need to put it into failsafe mode. It will then start a web browser at ip address 192.168.97.60 and it's possible to upload a new firmware there. You will need to join the same network on your computer and upload the firmware.

The firmware can be downloaded here: 
TellStick Net v2: 
http://fw.telldus.com/tellstick-net-v2/tellstick-net-v2-1.0.8-120-gc8a3942.bin

TellStick ZNet Lite (v1):
http://fw.telldus.com/tellstick-znet-lite/tellstick-znet-lite-1.0.7.bin

TellStick ZNet Lite (v2):
http://fw.telldus.com/tellstick-znet-lite-v2/tellstick-znet-lite-v2-1.0.8-122-ge6578e0.bin

Disconnect the power to TellStick[[BR]]
Press and hold the button next to the USB-connector, using a paperclip or other sharp object.[[BR]]
Connect the power again.[[BR]]
The middle LED should now flash four times. First flash should be longer and then three shorter flashes. Release the button after the fourth flash. [[BR]]
The middle LED will now confirm by flashing fast for one second.[[BR]]

[[BR]]