wiki:FirmwareVersion

Current Firmware Versions


Product Version
TellStick 6
TellStick Duo 12
TellStick Net 17
TellStick Net v2 1.2.0
TellStick ZNet Lite 1.2.0
TellStick ZNet Lite v2 1.2.0



Changelogs

TellStick

TellStick Duo

Changes since last stable version (version 5)

  • Support for some Oregon Scientific version 3 sensors
  • Can receive Hasta protocol, version 1 and 2
  • Checksum validation for Fineoffset (less false temperature readings)
  • Fix where some motion sensors/magnetic switches reported different codes for on and off
  • Better Oregon Scientific reception

TellStick Net

Changes since last stable version (version 4)

  • Support for some Oregon Scientific version 3 sensors
  • Can receive Hasta protocol, version 1 and 2
  • Checksum validation for Fineoffset (less false temperature readings)
  • Fix where some motion sensors/magnetic switches reported different codes for on and off
  • Improved the way the Oregon Scentific protocol is received
  • More precise server assignment logic allows for a TellStick Net to be placed on a certain server, which may be useful for beta testers
  • DHCP assignment fixes
  • Some minor bug fixes

TellStick ZNet Lite v1 & v2, TellStick Net v2

Changes in version 1.3.1 (beta)

Bugfixes:

  • Thermostat fixes
  • Allow Shelly-plugin through firewall

Changes in version 1.3.0 (beta)

New features:

  • Thermostat support
  • Sensor type Power, intended to eventually replace Watt

Changes in version 1.2.0

New features:

  • New sensor types: CO, CO2, PM2.5, Loudness, Volume, Weight and Moisture
  • New power types Ampere and Volt
  • URL-actions (in events) now support https
  • Firmware is ready for Rooms! (more information will follow)
  • Firmware is ready for Modes! (more information will follow)
  • Hostname and vendorid added to dhcp request
  • Add support for Z-Wave rain sensors
  • Add support for sending Z-Wave meter reset commands

Bugfixes:

  • Time conditions after 00:00 were not always evaluated correctly
  • Nexa codeswitch bell did not work correctly
  • Too big messages between TellStick and servers were not sent correctly, could affect for example device synchronization lists
  • Sensors reporting more than one type of value at the same time did not always send latest timestamp/value for all values (might diff 5 minutes)
  • Blockheater event had many minor bugs
  • When TellStick switched server, history about whether a trigger has triggered or not was lost, so a trigger might trigger again
  • Devices are now listed in the parameters of a group
  • Changing of RGB values possible also from local API
  • Try to resync time again if no network was available at boot time
  • Lots of other small bugfixes

Changes in version 1.1.1

  • Fix bug where it was not possible to change device names
  • Fix bug where TellStick showed red light altough it was online
  • Bugfix in protocol UPM. No data was transmitted.

Changes in version 1.1.0

  • Security update
  • Add support for device types
  • Add support for local control from the app
  • Bugfix where the dim value was lost after a name of a device was changed.
  • Bugfix, state change within one second was not acknowledged properly
  • Return sensor values as float in local API
  • Add option to enable beta firmware

Changes in version 1.0.15

  • Security updates
  • Bugfix where the dim value was lost after a name of a device was changed.

Changes in version 1.0.14

  • Better handling of Z-Wave-associations
  • Return sensor values as float in local API
  • Bugfix, state change within one second was not acknowledged properly

Changes in version 1.0.12

  • Add support for rf433 protocol Upm
  • Bugfix for delays in events where not stopped properly when switching servers
  • Bugfix for non-ascii characters in URLs in events
  • Bugfix: Nexa selflearning bell did not work after scanning
  • Bugfix for offset in suntime conditions
  • Add support for receiving protocol Sartano
  • Added battery report for 433 MHz sensors, where available
  • Automatic cleanup of 433 MHz sensors that haven't received any signals for a while

Changes in version 1.0.11

  • Allow lua functions to be called from the local api
  • Bugfix for large data transfers over SSL

Changes in version 1.0.10

  • Bugfix for handling a corrupt settings file
  • Bugfix when large messages are received from Telldus Live!

Changes in version 1.0.9

  • Add support for rf433 protocol SilvanChip (Kingpin, Ecosavers)
  • Add support for rf433 protocol Brateck (Roxcore)
  • Add support for rf433 protocol Ikea
  • Add support for Kangtai selflearning
  • Allow raw 433 data be processed by Lua code
  • Add support for passing username and password in url actions
  • New local webinterface based on React

Changes in version 1.0.8

  • Include local API (beta)
  • Retry events if a device action failes.
  • Z-Wave: Ignore bogus sensor values that a device does not support.
  • Z-Wave: Support Aeon Labs Smart Switch 6
  • Bugfix where the time might not be set correctly if no internet was available on boot
  • Various bugfixes

Changes in version 1.0.7

  • Bugfix, negative values where reported as 4 billion degrees.
  • Add support for rf433 protocol Waveman
  • Add support for thermostats
  • Fix for Qubino devices that stops inclusion at 26%

Changes in version 1.0.6

  • Add support for rf433 protocol Kangtai (Cotech and Clas Ohlson)
  • Add support for rf433 protocol Yidong (Biltema and Goobay)
  • Bug fix: Fix for dimmers in scheduled jobs
  • Fix bug when sending multiple rf433 commands quickly after each other
  • Add support for groups
  • Fix for not setting the dimmer value in the device state and device
  • Add rf433 protocol Sartano
  • Fix for scheduler bug rerunning a job between midnight and UTC midnight
  • Fix bug to not end up offline if an error occurs while talking to the server
  • Bugfix for reporting dim values correctly for Z-Wave devices.