| | 1 | == How to restore a bricked TellStick ZNet Lite == |
| | 2 | Did something happen during a firmware upgrade of your TellStick TNet Lite? And now it won't start again?[[BR]] |
| | 3 | Don't worry! You can probably restore it again yourself. |
| | 4 | |
| | 5 | If something goes wrong while upgrading the firmware in the TellStick ZNet Lite, you'll need to put it into failsafe mode. It will then start a web browser at ip address 192.168.97.60 and it's possible to upload a new firmware there. You will need to join the same network on your computer and upload the firmware. |
| | 6 | |
| | 7 | The firmware can be downloaded here: http://download.telldus.com/TZNetLite/restore/openwrt-ar71xx-generic-tellstick-offline-squashfs-sysupgrade.bin |
| | 8 | |
| | 9 | Disconnect the power to TellStick ZNet Lite[[BR]] |
| | 10 | Press and hold the button next to the USB-connector.[[BR]] |
| | 11 | Connect the power again.[[BR]] |
| | 12 | The middle LED should now flash four times. First flash should be longer and then three shorter flashes. Release the button after the fourth flash. [[BR]] |
| | 13 | The middle LED will now confirm by flashing fast for one second.[[BR]] |
| | 14 | |
| | 15 | [[BR]][[BR]] |
