How to restore a bricked TellStick ZNet Lite

Did something happen during a firmware upgrade of your TellStick TNet Lite? And now it won't start again?
Don't worry! You can probably restore it again yourself.

If something goes wrong while upgrading the firmware in the TellStick ZNet Lite, you'll need to put it into failsafe mode. It will then start a web browser at ip address 192.168.97.60 and it's possible to upload a new firmware there. You will need to join the same network on your computer and upload the firmware.

The firmware can be downloaded here: ​http://fw.telldus.com/tellstick-znet-lite/tellstick-znet-lite-1.0.3.bin

Disconnect the power to TellStick ZNet Lite
Press and hold the button next to the USB-connector, using a paperclip or other sharp object.
Connect the power again.
The middle LED should now flash four times. First flash should be longer and then three shorter flashes. Release the button after the fourth flash.
The middle LED will now confirm by flashing fast for one second.