| 1 | === Windows 7 === |
| 2 | |
| 3 | Disconnect the power to TellStick[[BR]] |
| 4 | Press and hold the button next to the USB-connector, using a paperclip or other sharp object.[[BR]] |
| 5 | Connect the power again.[[BR]] |
| 6 | The middle LED should now flash four times. First flash should be longer and then three shorter flashes. Release the button after the fourth flash. [[BR]] |
| 7 | The middle LED will now confirm by flashing fast for one second.[[BR]] |
| 8 | |
| 9 | |
| 10 | The computer must exist on the same subnet as TellStick ZNet Lite. To do this we need to change the computers ip-address. Open {{{Control Panel}}} > {{{Network and Internet}}} > {{{Network and Sharing Center}}} > click {{{Change adapter settings}}} in the left side.[[BR]] |
| 11 | Right click on the network adapter that you are using and choose {{{Properties}}}. |
| 12 | |
| 13 | Select {{{Internet Protocol Version 4 (TCP/IPv4)}}} and click {{{Properties}}}.[[BR]] |
| 14 | [[Image(network_adapter.png, nolink)]] |
| 15 | |
| 16 | Select {{{Use the following IP address}}} and enter the IP address {{{192.168.97.61}}} and the subnet mask {{{255.255.255.0}}}.[[BR]] |
| 17 | [[Image(ip_address_w7.png, nolink)]][[BR]] |
| 18 | |
| 19 | Click {{{OK}}} and then {{{Close}}} on the previous dialog to close them and set the new address. |
| 20 | |
| 21 | [[Include(restore_tznetlite)]] |
| 22 | |
| 23 | '''Remember to restore the previous settings in {{{Internet Protocol Version 4 (TCP/IPv4)}}} or you won't get Internet access.''' |